Click image for larger view
EPDTA9600 Two-Speed Control Handle with Trigger
Knight's EPDTA9600 Two-Speed Control Handle with Trigger is a non-programmable handle. It is comprised of five switches to make up a (2
) two-speed operation with Trigger Button by simply compressing the thumb levers. Halfway is one speed, fully compressed is the second speed.
The EPDTA9600 Two-Speed Control Handle with Trigger Lever is also available in a Single Speed
(EPA9600), Single Speed with Trigger Lever
(EPTA9600) and a Two-Speed
(EPDA9600) configuration. All units come with a standard mounting flange. You will need to specify the flange adaptor tube size for your End Effector
Common Control Handle Pilot Signals
Up and Down
Retract and Extend
Forward and Reverse
Part and No Part
Tilt Up and Down
VAC On and Off
Clamp and Un-Clamp
Track Dog Off and On
) Thumb Lever Configuration.
) Switches per thumb lever.
) trigger lever.
) Switch trigger lever.
) Single Pole 240V
UL Listed, CE Approved.
Various Mounting Options.
Product Weight: 2.8 lbs
Micro Single Pole Limit Switch
Knight Global's Single Pole Limit Switches have 1-N/O (Normally/Open) and 1- N/C (Normally/Closed) contact with M12 Connectors. (M12 and 4-pin female cables sold separately).
Trigger Micro Single Pole Limit Switch
Knight's Trigger Micro Single Pole Limit Switches have 1-N/O (Normally/Open) and 1- N/C (Normally/Closed) contact.
Click on image below to view/print
Control Handle Accessories