Knight Global - Creating A New Standard
Knight Global Facebook Page - Company and Industry News
Knight Global Twitter Feed - Company and Industry News
Knight Global YouTube Channel - Application Videos and More
Knight Global Linkedin - Keeping you Connected
KSHFA Series Floor Mounted Articulating Servo Hoist Arm
Knight Global's KSHFA Series Floor Mounted Servo Hoist Arm is an Intelligent Assist Device (IAD) that enables an operator to precisely locate or float a load in the "Z" direction (vertical axis) with speed, precision, quality and unmatched reliability. The KSHFA Series Servo Arm allows for an overhead varied reach within a work cell or station. Knight's Floor Mounted KSHFA Series is most commonly used when overhead clearances or support structures will not accommodate an overhead rail system.

Knight's Servo Hoist technology becomes an extension of an operator's natural movements and greatly improves accuracy, responsiveness and repeatability; which increases overall safety, productivity and quality. The inherent benefits include: eliminating wasted motions, reduced reaction times, and minimal effects of inertia with heavy loads.
  • Features/Benefits
  • Specifications
  • Controls
  • Accessories
Knight Global KSHFA Series Floor Mounted Servo Hoist Arm
Features
Mechanical Features
• Speeds: Up to 98 ft. per min. [30mpm].
• Maximum Lifting Capacity:
  Up to 1,500 lbs. [680kg].
• Maximum Reach: Up to 48 in. [1219mm].
  (Boom/ End Effector length not Included)
• Safety Rating of 125%.
• Floor Mounted Pedestal Heights:
  8 ft. [2.4m] - 10 ft. [3.0m].
• Fail Safe Brake.
Heavy Duty Roller Chain.
• Chain Lengths:
  12 ft. [365cm] - 20ft. [609cm].
• Sealed Worm Style Gearbox.
H5 Rated (Continuous Duty Cycle).
Software Features
• Programming and Diagnostic
  Communication Ports.
• Virtual Travel Limits.
• Speed Reduction Zones.
• Impact Limiting.
• Active Dampening.
• Standard Float Mode.
• Programmable Overload Capability.
Electrical Features
• Industry Standard 24 VDC, 2 AMP power
  is available for custom tooling such as:
  Clamps, Vacuum Cups, Switches,
  Proximity Limits, Lights, etc.
• Illuminated Run/ Stop Button.
240 VAC, Single Phase 50/60 Hz.
• Load Sensing, Pay Load and Handle
  Load.
• I/O Capabilities
  - (16) Inputs/ (8) Outputs
  - (8) Inputs/ (4) Outputs are free for
    interface controls.
• LED Status Indicators, Green and Blue
  Lighted Push buttons.
• LED Fault Indicators, Illuminated
  Run/ Stop Button, Twist to Release.
• Optional Remote Pendant or Remote
  Handle
.
Benefits
• Optional Overhead Carriage Mounted
  Configuration.
Knight Global KSHFA Series Floor Mounted Servo Hoist Arm
KSHFA Floor Mounted Servo Hoist  Arm Specifications
Part Number
Capacity lbs [kg]
Maximum Speed [fpm/mpm]
Voltage/ Phase
KSHFA500-2301
500 lbs. [226kg]
98.43 fpm. [30.0mpm]
240 / 1 Phase
KSHFA1000-2301
1,000 lbs. [453kg]
82.02 fpm. [25.0mpm]
240 / 1 Phase
KSHFA1500-2301
1,500 lbs. [680kg]
65.62 fpm. [20.0mpm]
240 / 1 Phase

Click on image below to view/print

Knight Global KSHFA Series Floor Mounted Servo Hoist Arm Specifications

Knight Global - Made in the USA
CE Certification
2011-2015 Knight Global. All Rights Reserved
* Due to continuous product development, Knight Global reserves the right to alter product specifications without notice *
2705 Commerce Parkway, Auburn Hills MI 48326 U.S.A. Ph: 248.377.4950 Fx: 248.377.2135
ISO9001 Certification
ISO14001:2008 Certification