TRA5000 Series Air Tractor
Knight Global's TRA5000 Series Air Tractor provides mobility by towing bridges, fixtures and heavier loads. The TRA5000 Air Tractor is typically used to assist an operator to push
loads. The TRA5000 Tractor Series is designed to be used in conjunction with Knight's RAD4110
workstation crane systems.
Knight Pneumatic Tractors can be integrated with an pneumatic fixture allowing for multiple configurations such as: automatic return home, conveying of a load to the next position, and starting and stopping limits with the use of air logic.
Maximum Speed: 1.9 ft. per sec [1.3mph].
Maximum Towing Capacity:
Up to 2,000 lbs. [908kg].
Maximum Air Consumption: 75 cfm.
MCBF: >500,000 (>10,000,000 Linear ft.).
Integrated Load Trolley.
Tows fixtures, bridges and loads.
Assists operator in pushing, pulling and
Integrating an Air Tractor with a pneumatic
fixture allows for multiple control
configurations such as: automatic return
home, conveying of a load to the next
position, and starting and stop limits, etc.
Optional Control Pendants.
- TRA2001 (Hanging)
- TRA2002 (Fixture Mounted)
Travels inside RAD4110
Product Weight: 87.9 lbs.
Travels inside RAD7510
Product Weight: 93.5 lbs.
Tractor must coast to a complete stop prior to it being engaged in the opposite direction. Failure to do so will damage the tractor and void the manufacture's warranty.
Note: In-Line Oiler is pre-set to deliver (1) one drip every (5) five seconds. Fill In-Line Oiler with SAE 10W low non-detergent oil before use. Air tractor is delivered with In-Line Oiler empty. Oil level should be periodically checked to ensure that the oil level is 0.5 in. [12.7mm] above the siphon tube.
TRA5000 Series Air Tractor Specifications
Click on image below to view/print